This barrel will fit Ruger SR22 model number 03620.
This is our 5.1" SR22 barrel that is approximately ½” longer than the factory barrel. This makes it easier to attach the accessories to the barrel and adds some muzzle velocity. It includes a (3/8”-24 TPI thread protector) but does not include an adapter to attach your suppressor to the barrel.
This item is for barrel and thread protector only, and you will need to purchase an adapter to attach a suppressor or compensator to this barrel.
For standard 1/2-28 TPI thread suppressors use Adapter Part # (SR22TBA)
For barrel installation instructions Click Here
(Ruger factory adapters will not work or interchange).
Note: Unfortunately we can only control the tolerances of our barrels and have no control over Rugers slide and frame tolerances. There has been some customers report that the slide of their 4 ½” SR22 rubs slightly on our barrels when installed. This slight rubbing will not affect the performance or accuracy of your SR22. However some .001” or .002” shim stock under the barrel where it mounts to the frame may be used to correct this problem.
Due to Title 22 U.S.C. 2778 of the Arms Export Control Act (AECA) we cannot export beyond the U.S. Border and Territories.
Be aware of your local laws before purchase.
By purchasing our products you agree to the Terms of this website.
Posted by email@example.com on Feb 11th 2022
Very nice barrel. Fit perfectly. Quite pleased with the barrel.
Posted by Mitch on Mar 13th 2020
It's been a while since I ordered the threaded barrels for my SR22's.
I ordered one for each of my SR22's. They both went in very easily and work great. I was a little skeptical with the change in barrel for reliability reasons, but they are still as reliable now as they were when I put them in several years ago. I have some where in the neighborhood of 10,000 and 15,000 rounds through each gun and they are running like the day I put the barrels in. I keep them clean and they just keep going and going.
All prices are in USD